SAE 100 R15 Hydraulic Hose
Home » Products » Hydraulic Hose » SAE Standard Hydraulic Hose » SAE 100 R15 Hydraulic Hose
SAE 100 R15
Construction:

This kind of hydraulic rubber hose shall consists of an inner tube of oil resistant synthetic rubber, multiple spiral plies of heavy steel wire wrapped in alternating directions, and an oil and weather resistant synthetic rubber cover.

APPLICATIONS:

This section covers hose for use with petroleum base hydraulic fluids.

WORKING TEMPERATURE:

From -40°C up to +121°C.

Specification of SAE 100 R15:

DN

Hose I.D

Wire O.D

Hose O.D

Working Pressure

Burst Pressure

Minimum Bend Radius

Weight

Length

Inch

mm

mm

mm

Mpa

Psi

Mpa

Psi

mm

kg/m

Meters

19

3/4

19.0

28.4

32.1

34.5

5000

138.0

20000

240

1.68

20/40

25

1

25.4

35.2

38.7

34.5

5000

138.0

20000

300

2.24

20/40

32

11/4

31.8

41.9

50.2

34.5

5000

138.0

20000

420

3.90

20/40

38

11/2

38.1

48.8

57.7

34.5

5000

138.0

20000

500

5.07

20/40

51

2

50.8

63.2

71.5

34.5

5000

138.0

20000

630

7.92

20/40

  • Convoluted Teflon Hose
  • Convoluted Teflon HoseAPPLICATIONS: The hydraulic hose, pneumatic hose and steam hose of the rubber industries. Plastic, clothing, auto, engine bed, shipbuilding, electrical machinery, diesel alternate liquid, gas, and high corrosive medium. TEMPERATURE RANGE: Constant use -50℃~+210℃, instant sue-70℃~+260℃.
  • Oxygen Hose
  • Oxygen HoseTube: EPDM/SBR blended, black and smooth. Reinforcement: Textile braided high tensile synthetic yarn. Cover: EPDM/SBR blended, blue, smooth weather and ozone, abrasion resistant. Application: For conveying welding gases. Brand As request. Standard: EN 559, GOST 9356-75.
  • Suction Discharge Oil Hose
  • Suction Discharge Oil HoseTube: Black, smooth, nitrile rubber compound. Reinforcement: High strength synthetic cord plus helix wire. Cover: Black, smooth (wrapped finish) high grade chloroprene rubber, compounded for an excellent resistance to weather, ozone, abrasion and oil.
  • Suction Discharge Acid-Alkali Hose
  • Cement Suction Delivery HoseTube: Black, smooth, compounded for long wear resistance in handling hard, sharp, abrasive materials. It is anti-static. Application: Dry material suction and delivery hose specially designed for transfer of dry cement, sand gravel, feed, seeds, etc. By suction, gravity or by pneumatic systems.
  • PVC Steel Wire Reinforced Hose
  • PVC Steel Wire Reinforced HoseCharacteristics: ·PVC Steel Wire Reinforced Hose with steel screwing inlaid, which with small bending radius, no smells, non-poison, light, transparent. ·It has good adaptability to hard weather conditions and minus pressure. ·Be enduring of high intensity, strong pulling force, and convenient for installation and transportation. ·Working Temperature: From -5℃ to +65℃.
  • Air Condition Hose
  • Air Condition HoseDescription: Air conditioning hose can be single braided with reinforcement layer of rayon or similar textile or it can be a two textile braided layers, separated from each other by a layer of bonded rubber compound. Both types have an outer cover, which is pricked to allow any refrigerant gas that has permeated through the reinforcement layer to escape without causing the hose to blister. It can also be made with a wire-reinforced with an inner liner, a wire reinforcement layer, and an outer layer of heat-resistant textile reinforcement.
  • Wire Braided Steam Hose
  • Wire Braided Steam HoseConstruction: Wire Braided Steam Hose is made of heat-resistant rubber, the reinforcement is braided with copper wire clutch facing. Applications: For conveying saturated steam and superheated water continuously at a temperature below 150 ℃ or intermittently at a temperature below 160 ℃.
Welcome to send your message to us
*Email
!!
*Content
!
Product Name
Your Name
Company
Tel/Fax.
Msn/Skype